ROHDE ST 411

Type	1 zone control
Range of application	Ceramics, Laboratory, Heat treatment, Fusing
Memory	32 programs
Supported W-Lan frequency (WIFI)	2,4 GHz

€420.00

RRP excl. VAT
plus shipping costs
In stock,
Delivery time appr. 3-5 workdays

Find your retailer Contact

Compare Remember Product data sheet

Clear and powerful control unit with flexible programming for use in ceramic and glass...

Close menu

Clear and powerful control unit with flexible programming for use in ceramic and glass workshops, schools and laboratories. The controller has a switching output (event) for controlling supply or exhaust air flaps. The option to change the current program, the program pause function and the program advance function make the controller particularly suitable for glass fusing. ROHDE myKiln App compatible and SolarReady (PV / photovoltaics).

Range of application: ceramics, laboratory, fusing

Single-zone controller
32 programs with up to 32 segments each
1 controlled heating/cooling ramp + soak period per segment
Current ROHDE controllers are optimised for operation with a PV system (ST 411 PV)
1 additional switch output
Soak times up to 99 hours 59 mins
Ramp rates from 1 to 999°C/h or “FULL”
USB port and Wi-Fi module for data logging via the ROHDEgraph and the ROHDE myKiln App / SolarReady (PV / photovoltaics)
ROHDE SolarReady configuration optional
Programs can be altered while firing
Program pause and advance function
Lockable keypad
Program start delay facility – up to 99 hours 59 mins
Recovery in the event of a power failure
Displays energy used
Setpoint display
Alarm buzzer
Temperature values can be displayed in °C or °F
ROHDE CPC 14 connector

With a PV-optimised controller, you can use solar power for any ROHDE kiln built from 1994 onwards.

The ROHDE ST 411 controller can be switched between conventional firing and SolarReady mode.

The new ST 411 controllers are available from all ROHDE dealers.

Close menu

Type	1 zone control
Range of application	Ceramics, Laboratory, Heat treatment, Fusing
Memory	32 programs
Supported W-Lan frequency (WIFI)	2,4 GHz
Segments	32 segments
Switch outputs	1 Schaltausgang
Ext. dimensions (W x D x H)	80 x 165 mm
Weight	405 g

Close menu

Connectivity with the ROHDE myKiln App

This Wi-Fi-enabled control system can be connected to the ROHDE myKiln app.

SolarReady—optimised consumption of your own solar power

The optional “hysteresis” configuration optimises the number of switching cycles for kiln heating, resulting in better use of the internal power sources and reduced load on the battery storage.

Displays the program section

The simple display of the firing curve on the controller conveniently helps to track the firing.

Easy input of the program sections

The control system allows effortless entry of program sections during both heating and cooling.

Program changes during the firing

The control system is characterised by its ability to make programme changes to programme steps that have not yet been completed during a fire.

Program pause/advance

he pause key can be used to pause the current program. I.e. the controller keeps the current temperature during the pause. The advance key can be used to switch from one heating ramp or segment to the next heating ramp or segment.

Continuation of a firing after a power failure

After a power failure, problem-free resumption of the firing is guaranteed.

USB port

Offline firing data recording and evaluation via ROHDEgraph is possible via the USB interface

Evaluating with ROHDEgraph

ROHDEgraph is a piece of software for visualising and archiving firing curves. During firing, the firing data can be automatically written to a USB flash drive by the ROHDE ST series controllers (e.g. ST 310, ST 411, ST 630 or ST 632).

Setpoint value display

During firing, the current setpoint can be displayed. The respective current setpoint is also stored in the archive files in ROHDEgraph and the ROHDE myKiln App.

Temperature indication in °C or °F

Whether Celsius or Fahrenheit, you get accurate temperature readings in the format you want.

Energy used display

During a fire, the current energy consumption can be read, as well as the total energy consumption of the fire, of the connected kiln, at the end of the fire.

Protection against over-temperature

If the kiln temperature exceeds a certain tolerance range, the kiln switches off.

Lockable keypad

A key lock provides security to prevent set data from being altered.

Find your retailer

Use this map to locate a ROHDE specialist trade partner in your area. Just click on the marker in the map to display detailed information about your local specialist.

Please enter your city or post code in the search box to mark your location on the map and to search for a local specialist in your area.

Glas-Fachhandel

Specialised dealers Glass

Just click on the marker in the map to display detailed information about your local dealer.

Login

ROHDE ST 411

Description

Technical data

Features

Connectivity with the ROHDE myKiln App

SolarReady—optimised consumption of your own solar power

Displays the program section

Easy input of the program sections

Program changes during the firing

Program pause/advance

Continuation of a firing after a power failure

USB port

Evaluating with ROHDEgraph

Setpoint value display

Temperature indication in °C or °F

Energy used display

Protection against over-temperature

Lockable keypad