Similar to illustration
ROHDE ST 630
| Type | 3 zone control |
| Range of application | Ceramics, Laboratory, Heat treatment, Fusing |
| Memory | 32 programs |
| Supported W-Lan frequency (WIFI) | 2,4 GHz |
RRP excl. VAT plus shipping costs In stock,
Delivery time appr. 3-5 workdays
Clearly structured control unit and easy to operate, for use in workshops, schools and hobby rooms.
- 3-zone controller
- 32 programs each with up to 32 segments
- 1 controlled heating / cooling ramp + soak per segment
- Soak peiods up to 99 hours 59 mins
- Ramp rates from 1 to 999°/ hour + FULL
- Ideal for glass or ceramics use
- Programs can be altered while firing
- Program pause and advance facilities
- Keyboard lockable
- Delayed start facility – up to 99 hours 59 mins
- Power failure recovery
- Energy used display
- Setpoint display
- Alarm buzzer & alarm output
- °C/°F operation
- Programmable event (optional, CPC 19 plug required)
- USB interface and Wifi module to evaluate and save data with ROHDEgraph and ROHDE myKiln App
With a PV-optimised controller, you can use solar power for any ROHDE kiln built from 1994 onwards.
The ROHDE ST 630 controller can be switched between conventional firing and SolarReady mode.
The new ST 630 controllers are available from all ROHDE dealers.
| Type | 3 zone control |
| Range of application | Ceramics, Laboratory, Heat treatment, Fusing |
| Memory | 32 programs |
| Supported W-Lan frequency (WIFI) | 2,4 GHz |
| Segments | 32 segments |
| Switch outputs | no switch outputs |
| Ext. dimensions (W x D x H) | 100 x 210 mm |
| Weight | 750 g |
Connectivity with the ROHDE myKiln App
This Wi-Fi-enabled control system can be connected to the ROHDE myKiln app.
SolarReady—optimised consumption of your own solar power
The optional “hysteresis” configuration optimises the number of switching cycles for kiln heating, resulting in better use of the internal power sources and reduced load on the battery storage.
Displays the program section
The simple display of the firing curve on the controller conveniently helps to track the firing.
Easy input of the program sections
The control system allows effortless entry of program sections during both heating and cooling.
Heating or cooling ramp
2 controlled heating ramps, 1 hold time and 1 controlled cooling ramp are available per programme number.
Program changes during the firing
The control system is characterised by its ability to make programme changes to programme steps that have not yet been completed during a fire.
Program pause/advance
he pause key can be used to pause the current program. I.e. the controller keeps the current temperature during the pause. The advance key can be used to switch from one heating ramp or segment to the next heating ramp or segment.
Continuation of a firing after a power failure
After a power failure, problem-free resumption of the firing is guaranteed.
USB port
Offline firing data recording and evaluation via ROHDEgraph is possible via the USB interface
Evaluating with ROHDEgraph
ROHDEgraph is a piece of software for visualising and archiving firing curves. During firing, the firing data can be automatically written to a USB flash drive by the ROHDE ST series controllers (e.g. ST 310, ST 411, ST 630 or ST 632).
Setpoint value display
During firing, the current setpoint can be displayed. The respective current setpoint is also stored in the archive files in ROHDEgraph and the ROHDE myKiln App.
Temperature indication in °C or °F
Whether Celsius or Fahrenheit, you get accurate temperature readings in the format you want.
Energy used display
During a fire, the current energy consumption can be read, as well as the total energy consumption of the fire, of the connected kiln, at the end of the fire.
Protection against over-temperature
If the kiln temperature exceeds a certain tolerance range, the kiln switches off.
Firing chamber monitoring
The ST controllers have firing chamber monitoring. The firing is interrupted if the room temperature where the kiln is installed exceeds 50 °C.
Lockable keypad
A key lock provides security to prevent set data from being altered.
Alarm buzzer
An alarm buzzer signals an fault.
Error messages
Errors in the process are indicated with codes on the device.
Please enter your city or post code in the search box to mark your location on the map and to search for a local specialist in your area.
Specialised dealers Glass Just click on the marker in the map to display detailed information about your local dealer.
