
Stafford ST 630
Type | 3 zone control |
Range of application | Ceramics, Laboratory, Heat treatment, Fusing |
Memory | 32 programs |
Segments | 32 segments |
RRP excl. VAT plus shipping costs Delivery time approx. 5 working days
Clearly structured control unit and easy to operate, for use in workshops, schools and hobby rooms.•
- 3-zone controller
- 32 programs each with up to 32 segments
- 1 controlled heating / cooling ramp + soak per segment
- Soak peiods up to 99 hours 59 mins
- Ramp rates from 1 to 999°/ hour + FULL
- Ideal for glass or ceramics use
- Programs can be altered while firing
- Program pause and advance facilities
- Keyboard lockable
- Delayed start facility – up to 99 hours 59 mins
- Power failure recovery
- Energy used display
- Setpoint display
- Alarm buzzer & alarm output
- °C/°F operation
- Programmable event (optional)*
- USB interface for datalogging
Type | 3 zone control |
Range of application | Ceramics, Laboratory, Heat treatment, Fusing |
Memory | 32 programs |
Segments | 32 segments |
Switch outputs | 2 switch outputs (optional) |
Ext. dimensions (W x D x H) | 100 x 210 mm |
Weight | 750 g |
USB port
Offline firing data recording and evaluation via ROHDEgraph is possible via the USB interface
Evaluating with ROHDEgraph
ROHDEgraph is a piece of software for visualising and archiving firing curves. During firing, the firing data can be automatically written to a USB flash drive by the ROHDE ST series controllers (e.g. ST 310, ST 411, ST 630 or ST 632).
Energy used display
During a fire, the current energy consumption can be read, as well as the total energy consumption of the fire, of the connected kiln, at the end of the fire.
Protection against over-temperature
If the kiln temperature exceeds a certain tolerance range, the kiln switches off.
Lockable keypad
A key lock provides security to prevent set data from being altered.
Error messages
Errors in the process are indicated with codes on the device.