The TE-DPF 220/80 Regeneration Furnace from the TE-DPF series has a volume of 220 litres and is suitable for temperatures up to 800°C.
This series has been designed for controlled and reliable burning-off of Diesel Particulate Filters (DPF) from exhaust systems in buses, construction machines, trucks, cars or generators.
The robust furnaces are ideally suited for heavy use in vehicle depots, on construction sites and in workshops. The TE-DPF series is characterised by a stable base frame with large, easy-to-move transport castors and a high-quality and energy-efficient lightweight firebrick lining.
Particular importance was attached to the safe and especially intuitive control of thermal cleaning processes. The easy-to-operate process controller is pre-programmed but can be adjusted manually to suit different particulate filter sizes with just a few steps. This ensures a very quick and closed cleaning process.
- All-around heating with floor heating
- Heating elements recessed into bricks
- 2-layer insulation structure
- Easy burning-off of particulate filters
- Product group
- TE-DPF series
- Energy type
- 9 kW
- 13 A
- CEE 16 A
- 220 litres
- Int. dimensions
- Ø590 x 800 mm
- Ext. dimensions
- 830 x 880 x 1140 mm
- 150 kg
- Heating elements
- Recessed into bricks
- Jumo (integrated)
Torsion-resistant welded steel housing
The housing consists of a torsion-resistant welded construction. Each furnace is manufactured by hand and leaves the factory after undergoing extensive quality controls.
Durable textured paint finish
The high-quality light-grey RAL 7035 textured coating protects the furnace body and steel construction.
Corrosion protection due to a stainless steel jacket
The robust and corrosion-resistant high-quality stainless steel jacket protects the furnace body.
Easy-to-move transport castors allow for effortless movement
Transport castors with large, smooth-running wheels allow for effortless and safe movement of the furnace.
Safe lid opening thanks to the robust lid
The lid comprises a robust lid hinge and a gas pressure spring allows for easy lid opening.
Air supply handle
The manual air supply handle ensures the best possible ventilation of the furnace interior.
Efficient 2-layer insulation structure
A sophisticated 2-layer insulation structure allows for required temperatures to be achieved using less energy. High energy efficiency can be achieved even in continuous use.
First-class useful volume
All insulating materials are processed precisely and carefully. Lightweight firebricks in the firing chamber are characterised by a high insulation value and good thermal shock resistance.
Covered heating elements on the floor
A high-quality cordierite plate protects heating elements mounted on the floor. The cordierite plate guarantees good heat transfer and at the same time protects the heating elements from damage.
Easy-to-maintain switchgear mounted in a connection box
The switchgear is mounted in a stainless steel connection box and can be easily maintained and accessed.
Integrated safety due to safety switch
A door contact switch automatically isolates the heating elements from the power supply when the kiln opens. The integrated overtemperature protection prevents damage to electrical components.
Low-wear contactors for control
The furnace is controlled by low-wear, durable contactors.
All-around heating allows for good heat distribution
All-around heating (on the side walls) combined with floor heating results in very good heat distribution throughout the firing chamber.
Durable heating elements made of “Kanthal A1”
We are committed to minimal surface load and precise manufacture when dimensioning “Kanthal A1” heating elements, so a long service life is guaranteed.
Heating elements securely recessed into bricks
Heating elements are recessed in protected position into bricks and achieve high energy input and provide ideal protection against mechanical damage.
Heating elements can be easily accessed and serviced
An easy-to-access detachable cover for heating element connections allows the effortless replacement of heating elements.
Precise temperature measurement with “Type K” thermocouple
The installed NiCrNi thermocouple (type K) is protected against damage and guarantees exact temperature measurement at all times.
The “CEE 16 A” connector allows for easy connection
The standardised CEE 16 A connector allows for easy connection and quick and start-up.
Components from well-known manufacturers contribute to long service life
We only obtain our electric components from well-known manufacturers (e.g. SIEMENS, MOELLER, WEIDMÜLLER, RITTAL).
Furnace construction in accordance with DIN EN 746-1
The unit is constructed and manufactured in accordance with DIN EN 746-1 Industrial Thermoprocessing Equipment.
Switchgear design in accordance with DIN EN 60519
The switchgear is designed in accordance with DIN EN 60519 Safety in Installations for Electroheating.
2-year warranty despite intense use
We deliberately refuse to reduce the warranty period despite commercial furnaces being used intensely except parts that are subject to wear.