Frontloader ELS 200 N
- Volume 200 litres
- Int. dimensions (w x d x h) 460 x 620 x 680 mm
- Power 11 kW
- Tappⓘ 1240°C
RRP excl. VAT incl. controller ST 310 plus shipping costs Delivery time 5-6 weeks
The ELS 200 N frontloader with Ergo Load System with a volume of 200 litres is a kiln from the ELS-N series for temperatures up to 1300°C.
ROHDE Frontloaders with Ergo Load System from the ELS-N series comprise two models with kiln volumes between 150 and 200 litres. The heating elements are recessed in new grooved firebricks on all five walls. The new, robust groove geometry provides the best possible protection for heating elements when the kiln is being charged. Constant power output ensures that heat is evenly distributed throughout the firing chamber to provide the best possible results.
The ELS-N series has been designed for use in workshops and schools. A 16-amp power connection allows kiln operation using a standard high-voltage socket (CEE 16 A). The high-quality 3-layer insulation structure allows for maximum firing temperatures of 1300°C.
Special features of the ELS-N series:
- 5-side heating resulting in even heat distribution
- Heating elements recessed in new grooved bricks for protection
- Stainless steel in-frame ventilation resulting in low external temperatures and corrosion protection
- 3-layer insulation structure
- “System ROHDE” R-SiC ceiling support prevents cracks and particles falling from the ceiling onto the ware.
- Comfort Stop as standard: hydropneumatic dampers allow the car to slow down smoothly before reaching the stop position.
For more information please visit our ELS info page.
Overview
- Product group
- Kiln
- Design
- Frontloader
- Type
- ELS-N series
- Tmax
- 1300°C
- Tanw
- 1240°C
Energy
- Energy type
- Electrical
- Power
- 11 kW
- Supply
- 16 A
- Voltage
- 3/N/PE 400V AC
- Connection
- CEE 16 A
Dimensions
- Volume
- 200 litres
- Int. dimensions (w x d x h)
- 460 x 620 x 680 mm
- Ext. dimensions (W x D x H)
- 800 x 1240 x 1730 mm
- Weight
- 510 kg
Equipment
- Insulation
- 3-layer
- Heating
- 5-side
- Heating elements
- Recessed into bricks
- Control
- ST 310
Long-term application temperature Tapp 1240°C
The kiln is designed for long-term and continuous use at temperatures up to 1240°C which makes it suitable for applications such as bisque, earthenware, onglaze and stoneware firings. These applications correspond to Seger Cone 6a or Orton Cone 6.
Cognitive Connectivity with the ROHDE myKiln App
This kiln can be connected to the ROHDE myKiln app using the included controller and enjoy all the advantages of the "digital firing program".
Power supply through a "CEE 16 A 5-Pol." plug connection
The standardised CEE 16 A connector allows for easy connection and quick and start-up. With this plug connection, furnaces with an output of up to 11 kW can be operated.
Ergo Load System ELS
Das Ergo-Load-System ELS bezeichnet Kammeröfen mit einem Schubboden zum Ausfahren. Der Ofenboden kann wie eine Schublade ausgefahren werden und ermöglicht damit ein ergonomisches und rückenschonendes Beladen von drei Seiten. Zwei hydropneumatische Dämpfer bremsen den Wagen kurz vor Erreichen der Endposition sanft ab. Die zusätzliche Bremsfunktion arretiert den Ofenboden sicher in jeder beliebigen Position.
Careful sealing of the door
The seal between the door and the outer bricks is ensured by a flexible insulating cord. This insulating cord closes the high-quality polished sealing surfaces in the cooler area around the front row of bricks and reduces the escape of thermal energy and radiation.
Safety – Safety switch
The safety switch, which is installed on the door of the furnace, interrupts the circuit to the heating elements when the door is opened and thus prevents live components from being touched.
Safety - Over-temperature protection
The integrated overtemperature protection prevents damage to electrical components. The electronic over-temperature protection is a safety routine in the control system, which can avoid a malfunction of the furnace and thus prevent damage to the electrical system.
Unique system prevents particles from falling onto the products
ROHDE uses a unique concept of mortar-free lightweight firebricks combined with R-SiC ceiling supports preventing cracks and particles from falling onto the products.
5-side heating allows for good heat distribution
Heating from 5 sides (side walls, back wall, door and floor) results in very good heat distribution throughout the firing chamber.
Heating elements securely recessed into bricks
Heating elements are recessed in a protected position into bricks and achieve high energy input and provide ideal protection against mechanical damage.
Precise temperature measurement with the “Type S” thermocouple
The installed PtRhPt thermocouple (type S) is protected against damage and guarantees exact temperature measurement at all times.
Please enter your city or post code in the search box to mark your location on the map and to search for a local specialist in your area.
Specialised dealers Glass Just click on the marker in the map to display detailed information about your local dealer.
